Liners are designed to “Standard Specification“ which will fit to the true size stated in the description. Be certain to measure your pools dimensions properly to ensure a proper fit. Tip: Measure from wall to wall for proper length, width and height.

Liner Qualities and Highlights

• 20mil thick.
• 100% virgin vinyl
• The most technically advanced radio frequency (R.F.) vinyl welding reduces the chance of cold spots in seaming process
• Quality control inspectors, inspect every liner during the welding process
• Above Ground Liners also come with an 25 Year Prorated Manufacturer’s Warranty - * On Seams Only.

Our pool liners are designed with UV inhibitors, bacteria and cold crack resister to help extend the life of your pool liner. Protect it from the damaging rays of the sun, heat and our cold winters (up to -20C) and pool chemicals. Each pool liner is cut for accuracy, Lap welded with an advanced radio frequency vinyl welding to reduce seam separations and each liner is inspected during the welding process by a quality control inspector.

Pools Tubs Liners has a variety of quality liners available to you. Heavy Duty, Premium and Deluxe. We will supply the weight of the liner and you can Request a Liner weight Chart so you can compare the quality you are purchasing.

For Easy installation and to protect your Liner we recommend the use our Pool Cove and Floor Pads

How to Choose the liner type you require for your Above ground Pool?

Above Ground Overlap Pool Liners

Above Ground Overlap Pool Liners are pulled over the wall and rolled up or cut off on the exterior side of the pool. Overlap liners can be installed so that the liner is not seen from the outside of the pool. These liners have coping strips-round or flat plastic piece that snaps over top of the liner to lock it in place. Above Ground Overlap Liners are the most prevalent type of liner and are the most economical of the above ground liner types. The overlap liner is available in solid colours as well full prints just like the beaded liner. We recommend this liner for the DIY customer since it is the most forgiving on installation errors and can cause the least amount of stress on your Above Ground Pool wall.

Above Ground Beaded Pool Liners
Standard Bead Above Ground Beaded Pool Liners

This popular bead is the same bead as you will find on an inground liner. To install a standard bead liner (also known as Sanp Bead) you must have a coping that is fastened to the pool wall called bead receiver (which we sell). This is the best choice of Bead for customers that are building a deck around the top of their pool. Standard bead liners allow you to replace or change the pool liner without dismantling the top of the Above Ground Pool. When ordering a replacement liner it is important to know the height of the pool wall. 48”, 52” or 54” wall heights. Specific pool brands Kayak, Ester Williams and Wilkes have unique styles of bead and must be custom ordered. Similar to the Standard Bead, the Kayak® bead is designed for Kayak® pools only, and will only fit into the standard Kayak® bead receiver. The Esther Williams Bead is a very specific bead only to be used for Esther Williams® or Johnny Weismeuller® pools. This is a larger, thicker beads that will not fit into standard bead receiver tracks.

Note: Liner will accommodate any flat bottom above ground pool and any pool bottom gradually dished to a maximum of 8 inches in the centre. This liner will not function with an expandable bottom/deep end.

*Free shipping for orders over $199 applies to home delivery for all products except pools and heaters, which are delivered free to your local terminal, or choose curbside tailgate delivery for $100. To qualify for free shipping, at least one item in the order must be minimum $159. Exceptions may apply to delivery in remote regions. You will be contacted if required
Read the full Shipping Policy here